Precautions for the use of protective casing products

The protective sleeve belongs to the closed sleeve, and the self-winding sleeve, the chain sleeve and the Velcro sleeve are different, more inconvenient, but because of its unique performance, loved by everyone, although simple, we usually use the process also need to pay attention to a few points.

Protective sleeve, also known as hollow belt, protective sleeve, made of polyester filament or nylon textile, with oil absorption and dustproof, anti-wear noise reduction, anti-corrosion and explosion-proof lamp characteristics. Can be widely used in industrial equipment, agricultural equipment, rail transit and other fields, play a protective role.

Since it is a closed casing, we need to know the maximum outer diameter of the product accurately before purchasing, and then the protective casing specifications need to be slightly larger to facilitate wire crossing and pipe threading. Generally, if it is used to wrap a pipe or wire, it is recommended that the protective sleeve specification be about 2mm larger. If it is used to wear multiple pipes or wire harness, the protective sleeve specification can be about 5mm larger.

In addition, as the closure of protective casing needs an edge locking process to prevent it from falling apart, it is recommended to pull the port horizontally during the inspection to check whether it is cracked. Of course, this problem will not occur in general, just in case.

In the process of use, after cutting to the required length, it is recommended to burn both ends of the protective sleeve with a lighter, on the one hand, it is beautiful, on the other hand, to prevent loose mouth.